首页 >  2010, Vol. 14, Issue (2) : 225-241

摘要

全文摘要次数: 4211 全文下载次数: 78
引用本文:

DOI:

10.11834/jrs.20100202

收稿日期:

2008-11-22

修改日期:

2009-02-24

PDF Free   HTML   EndNote   BibTeX
GPS码跟踪环自适应多径消除算法
1.中国科学院计算技术研究所, 北京 100190;2.广西大学计算机与电子信息工程学院, 广西 南宁 530001;3. 中国科学院 研究生院, 北京 100190
摘要:

根据多径信号的产生机理, 在对GPS接收机中的码跟踪环多径信号模型研究的基础上, 提出了采用自适应滤波的来消除GPS多径效应的算法。自适应滤波的方法不需要估计模型的系统参数, 而直接通过自适应滤波将多径信号滤除。在有噪声的情况下, 自适应滤波的RLS算法是最小二乘意义下的最优估计, 仿真的结果表明采用自适应滤波算法可以快速的消除多径的影响, 修正鉴相函数的过零点偏差, 提高码跟踪环的跟踪精度。由于自适应滤波算法是递推算法, 易于软、硬件实现。

Adaptive multipath mitigation algorithm for GPS C/A code track-ing loop
Abstract:

Multipath not only degrades the sensitivity of a GPS receiver, but also becomes the dominant error resource in GPS positioning systems. Multipath mitigation algorithm is the most significant in high sensitive and high accuracy GPS receivers. In this paper, multipath signal model in code tracking loop is studied first and a novel method for mitigation of multipath is presented which employs adaptive filtering recursive least square (RLS) algorithm. The system parameters need not be estimated in adaptive filtering algorithm and multipath signal can be filtered out directly. Under noisy scenario, the RLS algorithm is the best estimate for the filter weights with minimum least-squares errors. Simulation results show that the proposed method can reduce multipath error envelope effectively. The crossing-zero bias of the discriminator can be corrected which enhances the accuracy of code tracking in GPS receiver’s delay-locked loop (DLL). The most importance is that the RLS algorithm is recursive and convenient to implement both in hardware and software.

本文暂时没有被引用!

欢迎关注学报微信

遥感学报交流群